Skip to content

NEW DROP: Seal Rodent Entry Points Properly.

Two simple steps, and every tool you need in one kit.

GET THE KIT

A common problem. A practical place to start.

You don’t need to wait until an overlooked gap becomes a bigger concern to give it attention.

Every PestBlock kit pairs professional-grade steel wool with FULLSTOP expanding foam, plus the tools to fit them, so you can go from spotting an opening to sealing it the same afternoon.

Three places to start your inspection.

Where lines meet walls.

Check around plumbing, cable runs and other building penetrations. Look at the space around the fitting, not just the fitting itself.

Along the edges.

Inspect stationary gaps near window and door frames, garage structures and foundations. Match your repair to the opening and surface.

Beyond the living room.

Check accessible areas in basements, attics and crawl spaces. An opening out of everyday view is easy to miss.

See the wool + foam kits

Fill the gap. Then seal around it.

01

Seal

Pack steel wool into the gap, then spray foam over it. Don't overpack, the foam needs room to expand.

02

⁠Trim

Wait an hour, then cut it back flush with the scissors in the kit. Cutting earlier tears the surface.

03

Paint

After 24 hours, paint it with an oil-based topcoat. It blends into the wall instead of standing out. Always do this on sun-exposed seals.

Do It Right The First Time.

Steel Wool + FULLSTOP Foam + Tools. One Box.

Everything the job needs, ready to go:

FULLSTOP expanding foam with a built-in applicator

Professional-grade steel wool

Shears, push tool and work gloves

A Seal That Lasts

Three steps, one pass:

Clean out the gap

Pack in the steel wool

Cover it with FULLSTOP foam

Steel wool holds it, foam seals it. Start with less foam than looks right and leave room to expand.

Paint It And It Blends Right In.

Cuttable at 1 hour, fully cured at 24:

Trim it flush

Paint over it with an oil-based topcoat

It blends into the surface

Always paint any seal that gets direct sun

See what’s in the PestBlock kits ↓

PestBlock vs The Usual Fix

Most kits hand you one material and send you hunting for the tools. PestBlock gives you the full method in one box.

Pest Protection

Grip & Seal

All-in-One Kit

Easy Finish

A yellow can of Beest Full Stop Pest Block Foam with an attached black applicator nozzle.

Steel wool + expanding foam

Steel wool holds, foam seals

Foam, steel wool & tools included

Trim, paint & blend in

The Usual Fix

One material only

May loosen or leave gaps

Tools sold separately

Can leave a messy finish

New Drop

Steel Wool + Foam

Expands 2–3×

12 oz Cans

BEEST FullStop™ Pest Block Foam

Comparable Value:

$349.99

You're Saving

$0.00

Save $110.00

$59.99

You're Saving $110.00

You're Saving

$0.00
Slide 1 of 1
BEEST FullStop™ Pest Block FoamBEEST FullStop™ Pest Block FoamBEEST FullStop™ Pest Block FoamBEEST FullStop™ Pest Block FoamBEEST FullStop™ Pest Block FoamBEEST FullStop™ Pest Block FoamBEEST FullStop™ Pest Block FoamBEEST FullStop™ Pest Block FoamBEEST FullStop™ Pest Block Foam

New Drop

Steel Wool + Foam

Expands 2–3×

12 oz Cans

BEEST FullStop™ Pest Block Foam

$59.99

Seal rodent entry points permanently—before they become a costly problem.

Two simple steps: pack with steel wool, then seal with foam

Everything you need in one kit—take on the job with confidence

1. Choose your kit size:

Best Value

3 Cans + 6 Rolls

Whole-floor pass

Best Value

4 Cans + 6 Rolls

A few entry points

6 Cans + 9 Rolls

Full-house sweep

BEEST Steel Wool Roll

Micro-Serrated Scissors

Wooden Push Tool

Work Gloves

Free Shipping

1

Estimated Delivery By:

30-Day Returns

U.S. Based Support

American Owned

A little clarity. Before you seal.

What it does. Where it fits. What to know before choosing your kit.

30

DAYS

Support beyond the box.

Your kit includes a 30-day product warranty. Have a product question? Talk to our U.S.-based team.

1 (800) 540-4671